DIY Dresser Revamp

I'm super, duper, fricken ecstatic to share my newest project with you. I revamped an old dresser that I bought from a friend for $10. With a fresh coat of paint and some new hardware, this piece of furniture looks brand, spankin new! If you're planning to revamp or buy a dresser as well, it's advisable to first be knowledgeable by reading articles like Consumer Reports tested 13 dresser models for tip-over risks. This project is simple but it takes time for each layer of paint to dry. The entire project took 3 days. I'm almost positive that you have an old piece of furniture sitting around your house that needs a little bit of loving. If not, maybe you're looking for a new bookshelf or a dresser. Go to the thrift store, find one to your liking, and revamp it. I love bargain hunting, and the thrift store for furniture is where the treasure's at! I also like to think that refurbishing something old is like recycling, so I'm being green too right? It's really a win/win situation. Honestly, most, if not all, furniture pieces have potential to be something beautiful. I'm also well-equipped with the best power drills online to help me in these kind of projects. What you'll need to repaint furniture:

• A drop cloth or tarp (cause it can get messy)
• An old rag (cleanup)
• Painter's tape (I love Frog tape, it works really well)
• Sandpaper (fine grit, I used 220)
• Water-based primer
• Latex paint (I used Behr from Home Depot)
• Water-based polyurethane varnish
• A paint tray
• 2 small, dense foam rollers
• A small brush for the varnish

Basic instructions: 1. Undo all hardware. I also took apart the dresser so that none of the screws get painted (this part is optional but recommended). 2. Sand - get that shiny layer off. Sand it real well so that the primer sticks. 3. With a roller, primer all pieces (roll carefully so that there are no paint drips). Let dry (timing depends on your paint, read the label), and sand it down again if there are drops of paint or bumps. Then roll primer one more time. Let dry. Sand again to ensure all pieces are smooth. 4. Now it's time to paint. With the other roller, paint the dresser with your desired color. Let dry and sand again to smooth out bumps. Paint the dresser one more time and let dry. 5. If you're doing a design, it's time to paint it on now. I used frog tape to outline where I would paint. I also painted all the edges of the drawer gold too. Let this part dry as well. If you want a darker color, paint it another time. 6. Take the brush and paint on the varnish (a roller will cause bubbles). It's recommended to varnish 2-3 times. Since the top of my dresser will be used a lot, I varnished 3 times but the drawers I only painted twice. Let dry overnight. 7. Put the furniture piece together. Change out the hardware if you desire. Some tips from my experience: 1. Roll and paint on carefully so that you do not have to sand in between layers. It'll save you time in the end. 2. Bring plastic wrap to wrap up your rollers and brushes so that your tools do not dry up. If you're not using it, wrap it! 3. If you're using white, use an off-the-shelf white to save some money. I used Ultra Pure White by Behr. 4. If you're doing a design with painter's tape, do not allow the paint to completely dry before ripping off the tape. Simply wait 5-10 minutes, and rip tape off at an angle. Paint will chip if it becomes dry. This is how I got the dresser - I call it blegh green I took apart all the hardware and taped the screws to each piece. That's helpful! Sand it down!!! That turned me into Elphaba ^^^ Use a roller for the primer - smooth, long strokes Paint with a roller too - long strokes again and careful not to drip paint Be patient with drying. Make sure it's dry - better safe than sorry! This is my design. To guide the lines, the width of the white is the same as the tape I found this gold on sale at Home Depot for $5.25 (find it here) This is delayed gratification at its finest. Best feeling in the world is tearing off painter's tape. Ta-Da!!! Reassembling the dresser - it also needed a back. Home Depot will custom cut wood for you. All I had to do was nail the back onto the dresser And now this beauty is in my room, ready for my clothes! I'm totally in love with this dresser and am proud of the end product. What do you think? Do you shop for furniture at the thrift store? How do you revamp it? And can you share some of your current DIY projects? Obsessed with gold right now, Jay Reference: consider using Water Mold Fire Restoration